Replacement Delta Mini Hot End Assembly - Full Kit (21666)

Replacement Delta Mini Hot End Assembly - Full Kit (21666)

  • Safety: Always exercise extreme caution when working on any electrical device, including your 3D printer.
  • Ensure that the power plug is removed and the printer has fully cooled down prior to working on the printer.
  • Product SKU: 133684
Available: Out of Stock
£37.99

This is a replacement Hot End Assembly for the Monoprice™ MP Mini Delta 3D Printer.

Warranty: Replacing parts on your 3D printer may result in its warranty being voided. If you are having difficulty and are unsure if your printer is still under warranty or wish to prevent voiding your warranty, please contact our tech support team at tech@monoprice.com for assistance.

Safety: Always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and the printer has fully cooled down prior to working on the printer.

Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.

How long will it take for my order to arrive?

After the order has been placed, shipping takes about 5-7 business days. Our warehouse is located in the Netherlands.

What do I have to pay for shipping?

The shipping is free for all orders to the UK and Jersey. Custom fees are also paid by Monoprice GmbH.

What are the returns policy?

You can return your items to us for free within 14 days without giving a reason. We expect the items to be in their original condition upon return.

How does the return work?

If you do not like an article, you can return it to us within 14 days of delivery. Please contact us at uksupport@monoprice.com to receive a free return label. Please print the return label, stick it on the carefully sealed package and hand it over to your local post office. Please keep the document with the tracking number carefully.

Recently Viewed

3D Printer Parts & Accessories

3D Printing

Customer Reviews

Based on 14 reviews
57%
(8)
21%
(3)
7%
(1)
7%
(1)
7%
(1)
J
Joseph M.
Prints like new

Perfect replacement, my machine prints like new again. It comes as a complete assembly too, so now I have spares from the old one since some parts were salvageable.

R
Randall M.
Does what it says on the tin

(This assembly didn't come in a tin ... )I got this item after pricing out the entirety of parts that come in this assembly separately, and realizing that buying the assembly was much more cost effective and also easier to install.This immediately allowed my MP Mini Delta to print properly and with no thermal issues.I would recommend this for anyone whose hot end doesn't like to heat up unless you manually move the wires (my problem) or if the insulation around the hot end is missing (like mine was).

A
Angel D.
It was ok but broke on 1st day

The first day I got it it failed to work and it broke. So I re ordered another one. Fialment didnt get hot enough.

C
Christopher O.
Used for my mini select v1

I have a monoprice mini select v1 (15365) my nozzle got clogged and in pulling things apart I thought I'd broken some parts of the hot end. For version 1 you can upgrade to the E3D V6 hot end after printing a bracket, which I might since you can get knock offs of that head for cheap, but I wanted too get parts from monoprice. While this says it's for the delta printer it works fine for mini select with the following changes:1. Wires need extended2. remove back portion to allow it to mount to mini select (heat sync has a plastic thing on it you can just take off, mini select has this piece connected to the printer, portion the springs grab onto)3. Keep track of the connections I marked all wires when unplugging from the board (they are not marked at all and all look the same)4. re level bed as the new nozel is not exactly same length (I had to raise my bed about 2.5 twists) you're bed may be different, but will still need adjusted like with any change of the printer.5. I also re used my original fan with it's bracket, but you don't have to.Happy hobby-ing I'm back up and printing

K
Katsuhiro N.
good!

Replacing parts was easy. It's molded smoothly compared to before replacement.

Customer Reviews

Based on 14 reviews
57%
(8)
21%
(3)
7%
(1)
7%
(1)
7%
(1)
J
Joseph M.
Prints like new

Perfect replacement, my machine prints like new again. It comes as a complete assembly too, so now I have spares from the old one since some parts were salvageable.

R
Randall M.
Does what it says on the tin

(This assembly didn't come in a tin ... )I got this item after pricing out the entirety of parts that come in this assembly separately, and realizing that buying the assembly was much more cost effective and also easier to install.This immediately allowed my MP Mini Delta to print properly and with no thermal issues.I would recommend this for anyone whose hot end doesn't like to heat up unless you manually move the wires (my problem) or if the insulation around the hot end is missing (like mine was).

A
Angel D.
It was ok but broke on 1st day

The first day I got it it failed to work and it broke. So I re ordered another one. Fialment didnt get hot enough.

C
Christopher O.
Used for my mini select v1

I have a monoprice mini select v1 (15365) my nozzle got clogged and in pulling things apart I thought I'd broken some parts of the hot end. For version 1 you can upgrade to the E3D V6 hot end after printing a bracket, which I might since you can get knock offs of that head for cheap, but I wanted too get parts from monoprice. While this says it's for the delta printer it works fine for mini select with the following changes:1. Wires need extended2. remove back portion to allow it to mount to mini select (heat sync has a plastic thing on it you can just take off, mini select has this piece connected to the printer, portion the springs grab onto)3. Keep track of the connections I marked all wires when unplugging from the board (they are not marked at all and all look the same)4. re level bed as the new nozel is not exactly same length (I had to raise my bed about 2.5 twists) you're bed may be different, but will still need adjusted like with any change of the printer.5. I also re used my original fan with it's bracket, but you don't have to.Happy hobby-ing I'm back up and printing

K
Katsuhiro N.
good!

Replacing parts was easy. It's molded smoothly compared to before replacement.